|
Wired Kiosks
 
 
|
We did two kiosks for Wired Magazine in coordination with Tronic Systems Inc., a design firm based in New York city.
Jesse Seppi, one of the designers at Tronic, designed the kiosks using a three dimensional modeling program.
The digital model was then sent to us, and we designed the armature and milled out the kiosks in EPS.
The EPS was then assembled and the wiring and hardware were installed.
We then coated the EPS with Polyurea and finished out the kiosks with paint, lighting, monitors and gadgets.
These informational kiosks for Wired Magazine technology showcase were
in the W hotels in San Francisco and San Diego, CA.
What can we fabricate for you, using your 3D model?
|
